Omron NV Series - Selecting the Data to be Transferred

196
Transferring Screens from the NV-Designer Section 9-1
the COM port number does not agree with the COM port to which the PT is
connected.
9-1-2 Selecting the Data to Be Transferred
Transfer Data
Note Enter the screen numbers individually, delimited with commas (1,
3, 5) or as a range (1- 5).
All Data Select this check box to transfers all of the data.
Base Screen Select this check box to transfer base screen data. Enter the
screen number of the base screens.
Configuration Select this check box to transfer the NV Configuration data.
Keyboard screens Select this check box to transfer the keyboard screen data.
Enter the keyboard screen numbers.
Login Screen
(NV4W/NV3Q only)
Select this check box to transfer the login screen data. Enter
the login screen numbers.
Flow Display Select this check box to transfer the flow display data.
Write Address Select this check box to transfer the Write Address data.
Recipes Select this check box to transfer recipe files. Enter the Recipe
File Number.
Password
(NV4W/NV3Q only)
Select this check box to transfer passwords.