119
Bit Switches (“Switch”) Section 7-4
7-4 Bit Switches (“Switch”)
7-4-1 Bit Switches
Bit switches can be used to turn ON and OFF specified bits in the PLC.
Set the bit address when setting the operating mode of the switch.
7-4-2 Default Settings of Bit Switches
7-4-3 Operation Modes of Bit Switches
7-4-4 Bit Switch Settings
Basic Setup
Operation mode Momentary 10.00
ON/OFF Indication On Assign Output Address
Color Setup The color depends on the bit switch part.
Option Key Press Sound Enabled
Valid Condition Not set.
Operation Security
Displays not restricted.
Operations not restricted.
Label
When OFF
Tex t
Font True Type (NV-Designer)
Position Left
Size: Number of dots 16
Language No. Language 0
Character Style Not supported.
Color: Character Black
Background color Not supported.
When ON
Text A B C D
Font True Type (NV-Designer)
Position Left
Size: Number of dots 16
Language No. Language 0
Character Style Not supported.
Color: Character Black
Background color Not supported.
Set The specified bit in the PLC is turned ON.
Reset The specified bit in the PLC is turned OFF.
Momentary The bit is ON as long as the switch is held down.
Alternate Pressing the switch once turns the bit ON or OFF.
See Also
Setting methods are described while creating a screen.
Refer to 4-2-4 Creating Base Screens.
To Next Page
Loading...
