187
Switching the Display Language Section 8-7
8-7 Switching the Display Language
8-7-1 Switching the Display Language
You can register the language and corresponding character string for each
part in advance and then change all registered parts at the same time using a
function switch or a command from the PLC. Set the language and character
string for each language number and then specify the language number to
switch the language. This can be used to switch the language display. Up to
16 language numbers can be registered (0 to 15).
Japanese
(Language 0)
English
(Language 1)
Chinese
(Language 2)
Precaution for Correct Operation
• It is important to determine which languages to register for each language num-
ber before creating screens. Otherwise many languages will be displayed.
• When using the display language switching function, memory is used for the
number of language times the number of screens so the number of screens
that can be registered will be reduced.
To Next Page
Loading...
