Omron NV Series - Default Settings for Flow Displays; Example of Creating a Flow Display

167
Flow Display Data Section 8-3
8-3-3 Default Settings for Flow Displays
8-3-4 Example of Creating a Flow Display
1,2,3... 1. Select Flow Display from the PT Menu.
2. Specify the number of messages and condition for displaying messages.
Basic Setup Number of Messages 0
Display Condition Start Address 10
Condition ON
Creating a Sample Screen
When the RUN Switch is turned ON,
the message “Operating!” will appear in
the flow display.
Click the Basic Setup Tab and
set the following parameters.
Number of Messages:
Display Condition
Start Address:
Condition:
1
W10
ON
*1 Up to 128 messages can be
registered.