Omron NV Series - Copying and Moving Screens between Projects

64
Copying and Moving Parts and Screens Section 5-5
5-5-2 Copying and Moving Screens between Projects
With the NV-Designer, you can copy or move base screens between different
projects.
Copying Screens between
Projects
Right-click the screen to copy in the Screen Manager and select Copy (or
select the screen and click the Copy Button). Then right-click the screen
where you want the copy to be made in the Screen Manager for a different
product and select Paste (or select the screen and click the Paste Button).
After pasting the screen, you can double-click it to display the copy.
Moving Screens between
Projects
Right-click the screen to move in the Screen Manager and select Cut (or
select the screen and click the Copy Button). Then right-click the screen
where you want the copy to be made in the Screen Manager for a different
product and select Paste (or select the screen and click the Paste Button).
After moving the screen, you can double-click the screen to display it.
Note You cannot copy screens between different models of PT.
→
→