Omron NV Series - Operation Security Settings in the NV Configuration

185
Security Functions Section 8-6
8-6-5 Operation Security Settings in the NV Configuration
The following tab page will be displayed when the Password Tab is clicked in
the NV Configuration Dialog Box.
Password Tab Page
Item Description
Operation Security Function
Available
Enables or disables operation security.
Level Output Sets whether to output the security level to an
address. Specifies the output address if the security
level is to be output.
Function when Operation
Restricted
Specifies what happens when a part with a higher
security level than the current one is touched.
• Off: No operation.
• Output Warning Beep: The buzzer beeps to warn
you.
• Display Login Screen: A login screen is displayed.
Set the login screen number (0 to 15) to display.
Note A login screen will need to be created.
Change Screen upon Logout Sets whether to change the screen when logging
out of a security level. To change to the specified
screen, set the screen number (0 to 1,023) to dis-
play when logging out.
Time-Out Automatic
Logout
Sets whether to automatically log out (level 0) after
a period of inactivity. Sets the time of inactivity until
the automatic logout (1 to 42 minutes).
Login Screen
Time-Out
Enables or disables automatically returning to the
original screen from the Login Screen where the
password is entered. If the timeout function is used
for the Login Screen, set the time before returning
to the original screen to between 1 and 42 minutes.
Password
Change
Screen Time-
Out
Enables or disables automatically returning to the
original screen from the Password Change or Man-
agement Screen. If the timeout function is used for
the Password Change Screen, set the time before
returning to the original screen to between 1 and 42
minutes.