198
Transferring and Copying Data Using SD Memory Cards (NV4W/NV3Q) Section 9-2
9-2 Transferring and Copying Data Using SD Memory Cards
(NV4W/NV3Q)
9-2-1 SD Memory Cards
When connecting to the computer running NV-Designer is not possible, an SD
memory card can be used to transfer base screen data or NV Configuration
data to a PT. Transferring data in this way is done in the same units as data
transfer via communications from the NV-Designer. Each file is handled sepa-
rately.
Transferring Data between
the NV-Designer and PT
• Using SD Memory Cards to Transfer Data to the PT.
• Base screen data stored in the PT can be transferred to the NV-Designer
by using an SD memory card.
Copying Data between
PTs
SD memory cards can be used to copy data to other PTs.
NV4W/NV3Q
Read data from the SD
memory card.
Take the SD memory card to the
installation site or e-mail the file.
NV-Designer Screen
Design Software
Base screen data, NV Configuration,
and other data is saved as files in SD
memory cards.
SD memory card
SD memory card
NV4W/NV3Q
NV4W/NV3Q
Base screen data, the NV Configuration, and other data
can be copied between PTs by using an SD memory card.
To Next Page
Loading...
