Omron NV Series - Copying and Moving Parts and Screens; Copying and Moving Parts between Screens

63
Copying and Moving Parts and Screens Section 5-5
5-5 Copying and Moving Parts and Screens
5-5-1 Copying and Moving Parts between Screens
With the NV-Designer, you can copy or move parts and graphics on base
screens between different projects or within the same project.
Copying Parts between
Screens
Right-click the part to be copied and select Copy. Then right-click where you
want the copy to be made and select Paste.
Note If you copy parts between screens for different models of PT, the parts will
automatically be converted to allow for differences in parts colors and func-
tionality between the PTs.
Moving Parts between
Screens
Right-click the part to be moved and select Cut. Then right-click where you
want to move the part and select Paste.
Note If you move parts between screens for different models of PT, the parts will
automatically be converted to allow for differences in parts colors and func-
tionality between the PTs.
→
→