Omron NV Series - Starting the NV-Designer and Creating New Projects; Starting the NV-Designer and Using the New Project Wizard

54
Starting the NV-Designer and Creating New Projects Section 5-1
5-1 Starting the NV-Designer and Creating New Projects
This section describes how to start the NV-Designer and create projects.
5-1-1 Starting the NV-Designer and Using the New Project Wizard
1,2,3... 1. Select Program – OMRON – NV-Designer – NV-Designer Ver.@ from the
Windows Start Menu to start the NV-Designer. (The menu commands may
be different if a different Program Folder was specified during installation.)
2. When the NV-Designer is started, the NV-Designer Dialog Box will be dis-
played.
3. Select an option in the NV-Designer Dialog Box and click the OK Button.
Item Description
1 Create New Project Select this option to create a new project.
2 Open Existing Project Select this option to read and edit a project that
is saved to the disk. A dialog box for opening
the project will be displayed for you to select
the project that you want to edit.
3 Recent Projects Select this option to open a project that has
been used recently.
1
2
3