125
Data Parts and Keyboard Parts Section 7-7
2. Double-click the data part and change the basic setup.
3. Sets the color and form.
4. Select the Keyboard Screen.
Double-click part number
"DA0" then make the basic set-
tings as shown below.
Basic Setup
Data Format: [DEC (1W)
Unsigned)]
Zero Suppression: Off
Address: D130
Font: Vertical: 2, Horizon-
tal: 2
Click the Color and Form Tab,
make the settings shown
below, then click the OK But-
ton.
(Make the input settings later.)
Display Frame: On
Do not change the settings on
the Reverse/Blink Tab Page.
Select File - Keyboard Screen
from the menu bar.
The Edit Keyboard Screen
Dialog Box will be displayed.
Click [ ] 0, and then click the
Edit Screen Button.
To Next Page
Loading...
