139
Line Graphs Section 7-10
2. Select group 0, click the Settings Button, and then set the log data.
3. Set line graph control on the Line Graph Tab Page.
4. Open base screen 0 and position a line graph part.
Make the following settings,
and then click the OK Button.
Sampling: On
Start Address: D200
Data Format: DEC (1 W)
Number of Lines: 1
Sampling Trigger: On Sam-
pling Cycle
Sampling Cycle: 5
Storage Area
Number of
Records for Each
Line: 500
Make the following settings,
and then click the OK Button.
Line Graph Control: On
Address: W15
Double-click "0" in the Screen
Manager, and then drag the
line graph part from the stan-
dard parts library and drop it
on the base screen.
To Next Page
Loading...
