44
Creating a Simple Screen Section 4-2
Setting Character Strings
1,2,3... 1. Click the Button on the graphic bar and click on the base screen
where you want to type in a character string.
2. Enter a character string on screen 0. Enter “Hello! I’m NV.”
3. Select the character string that you just entered and select Character At-
tribute from the Graphic Menu. Set the character color and size.
Setting Function Switches
Use the following procedure to create a function switch (labeled "Monitor") on
screen 0 to switch the screen display.
1,2,3... 1. Select the function switch parts library.
2. Drag the part called FSW0 and drop it on the base screen.
3. Double-click the function switch that was pasted.
To Next Page
Loading...
