Omron NV Series - Page 94

73
Setting the NV Configuration from the NV-Designer Section 6-2
NV Configuration Dialog Box
Initialize Button The following message will be displayed when the Initialize Button is clicked in
the NV Configuration Dialog Box.
Click the OK Button to reset all parameters to default values.
Tab page Description Reference
Basic Setup Sets the PT model and system memory. Set the first
words in the Word Area and Bit Area in the PLC.
6-2-2 Basic Settings Tab Page
Communication
Parameters
Sets the serial communications settings between the PT
and PLC.
6-2-4 Communication Parameters Tab
Page
PLC Multiple Con-
nection (NV4W/
NV3Q only)
Sets parameters when multiple PLCs or OMRON EJ1
Temperature Controllers are connected using Modbus.
6-2-5 PLC Multiple Connection Tab
Auto-Paging Enables auto-paging, which automatically switches the
screen displayed on the PT after a certain period of time.
6-2-6 Auto-Paging Tab Page
Start-up Screen Sets the number of the screen displayed on the PT when
the power supply is turned ON and its display time.
6-2-7 Start-up Screen Tab Page
Setup 1 Sets the clock reference, automatic backlight OFF func-
tion, key press sound, battery error display, file compres-
sion, display language switching, backlight brightness,
and contrast. (NV3W only)
6-2-8 Setup 1 Tab Page
Setup 2 (NV4W/
NV3Q only)
Enables/disables displaying the SD Memory Card Menu. 6-2-9 Setup 2 Tab Page (NV4W/NV3Q
Only)
Hold Memory
(NV4W/NV3Q only)
Sets the words to be held for PLC and PT internal mem-
ory.
6-2-10 Hold Memory Tab Page (NV4W/
NV3Q Only)
Recipe Sets whether to use the recipe function, and also the
control address for the recipe function.
8-5 Recipes
Alarm History
(NV4W/NV3Q only)
Sets sampling for groups 0 and 1, as well as the control
address for the alarm history.
7-11 Alarm Lists (NV4W/NV3Q)
Line Graph Sets sampling for groups 0 to 4 for line graphs. 7-10 Line Graphs
Password
(NV4W/NV3Q only)
Sets security using passwords. 8-6 Security Functions