Omron OMNUC G Series User Manual

11
Items to Check When Unpacking
Items to Check When Unpacking
Check the following items after removing the product from the package.
• Has the correct product been delivered?
• Has the product been damaged in shipping?
 Accessories Provided with Product
Safety Precautions document  1
• No connectors or mounting screws are provided. They have to be prepared by the user.
• Should you find any problems (missing parts, damage to the Servo Drive, etc.), please contact
your local sales representative or OMRON sales office.
Specifications
Connector for main
circuit power supply
terminals and control
circuit power supply
terminals
Connector for External
Regeneration Resistor
connection terminals
and Motor connection
terminals
Mounting
Brackets
Single-phase
100 VAC
50 W Included 
100 W
200 W
400 W
Single-phase/
3-phase
200 VAC
100 W
200 W
400 W
750 W
1 kW
1.5 kW
3-phase 200
VAC
2 kW  Included
3 kW
5 kW
7.5 kW

Omron OMNUC G Series Specifications

General

Brand	Omron
Model	OMNUC G Series
Category	Servo Drives
Language	English