Omron OMNUC G Series User Manual

5-86
5-27 Details on Important Parameters
Operating Functions
5
5-27 Details on Important Parameters
 This section provides an explanation for the particularly important parameters.
Be sure to fully understand the meanings of these parameters before making changes to the
parameter settings.
 Do not set or change the default values for user parameters listed as "Reserved".
 The attribute indicates when the changed setting for the parameter will be enabled.
Attribute Timing when changes will be enabled
A Always enabled after change
B
Change prohibited during Servomotor operation and command issuance.
(It is not known when changes made during Servomotor operation and command issuance
will be enabled.)
C
Enabled when the control power is reset, or when CONFIG command is executed via the
network (MECHATROLINK-II communications).
R Read-only and cannot be changed.

Omron OMNUC G Series Specifications

General

Brand	Omron
Model	OMNUC G Series
Category	Servo Drives
Language	English