1-10
1-5 Applicable Standards
1
Features and System Configuration
1-5 Applicable Standards
EC Directives
Note To conform to the EMC Directives, the Servomotor and Servo Drive must be installed under
the conditions described in Wiring Conforming to EMC Directives on page 4-28.
UL and CSA Standards
*1. The approval of UL and CSA is pending for motor capacities of 6 to 7.5 kW.
EC Direc-
tives
Product Applicable standards Comments
Low Voltage
Directive
AC Servo Drive EN 61800-5-1
Safety requirements for electrical equipment for
measurement, control, or laboratory use
AC Servomotors IEC 60034-1/-5 Rotating electrical machines
EMC
Directive
AC Servo Drive
EN 55011 Class A Group 1
Limits of radio disturbance and measurement
methods for industrial, scientific, and medical
radio-frequency equipment
EN 61000-6-2
Electromagnetic compatibility (EMC) Immunity
standard for industrial environments
IEC 61000-4-2 Electrostatic discharge immunity testing
IEC 61000-4-3 Radio frequency radiation field immunity testing
IEC 61000-4-4 Electrical fast transient burst immunity testing
IEC 61000-4-5 Lightning surge immunity testing
IEC 61000-4-6 High-frequency conduction immunity testing
IEC 61000-4-11 Momentary power interruption immunity testing
Standard Product Applicable standards File number Comments
UL
standards
AC Servo Drive UL 508C E179149 Power conversion equipment
AC Servomotors
*1
UL 1004-1 E331224 Electric motor
CSA
standards
AC Servomotors
*1
CSA C22.2 No.100 E179189 Motor and generator
To Next Page
Loading...
Need help?
General
