Oracle SPARC T5-8 - Page 106

Install a Storage Backplane
106 SPARC T5-8 Server Service Manual • November 2015
5.
Connect the two storage backplane cables to the storage backplane and the
motherboard.
No. Description
1. Data cable
2. Power cable
6.
Install the main module back into the server.
See “Install the Main Module” on page 95.
7.
Install the hard drives that you removed back into the main module.
Refer to the notes that you took when removing the hard drives to install them back into their
original slots. See “Install a Hard Drive” on page 85.
8.
Power on the server.
See “Returning the Server to Operation”.
9.
Verify the installation.
See “Verify the Storage Backplane” on page 107.