Install a Hard Drive
Servicing Hard Drives 85
5.
Pull the drive out of the server.
Caution - The latch is not an ejector. Do not force the latch too far to the right. Doing so can
damage the latch.
6.
Install the replacement drive or a filler tray.
See “Install a Hard Drive” on page 85.
Related Information
■
“Determine Which Hard Drive Is Faulty” on page 82
■
“Install a Hard Drive” on page 85
Install a Hard Drive
1.
Align the replacement drive to the drive slot, and slide the drive in until it is
seated.
To Next Page
Loading...
Need help?
General