Prepare to Power Off the Server
54 SPARC T5-8 Server Service Manual • November 2015
■
“Power Off the Server (SP Command)” on page 54
■
“Power Off the Server (Power Button - Graceful)” on page 55
■
“Power Off the Server (Emergency Shutdown)” on page 55
■
“Disconnect the Power Cords” on page 56
Prepare to Power Off the Server
1.
Notify any affected users that the server will be shut down.
Refer to the Oracle Solaris system administration documentation for additional information.
2.
Save any open files, and quit all running programs.
Refer to your application documentation for specific information for these processes.
3.
Shut down all logical domains.
Refer to the Oracle VM system administration documentation for details.
4.
Shut down the Oracle Solaris OS.
Refer to the Oracle Solaris administration documentation for details.
5.
Power off the server.
Related Information
■
“Power Off the Server (SP Command)” on page 54
■
“Power Off the Server (Power Button - Graceful)” on page 55
■
“Power Off the Server (Emergency Shutdown)” on page 55
■
“Configuring Boot and Restart Behavior” in SPARC and Netra SPARC T5 Series Servers
Administration Guide
Power Off the Server (SP Command)
You can use the SP to perform a graceful shutdown of the system. This type of shutdown
ensures that all of your data is saved and that the system is ready for restart.
Note - Additional information about powering off the system is provided in the SPARC T5
Series Servers Administration Guide.
1.
Log in as superuser or equivalent.
Depending on the type of problem, you might want to view system status or log files. You also
might want to run diagnostics before you shut down the system.