Servicing the Battery 123
Servicing the Battery
The battery is a cold-service component that can be replaced only after you have removed the
main module.
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause server components to fail.
These topics describe service procedures for the battery in the server.
Steps Description Links
1. Determine if the battery is faulty. “PSH Overview” on page 41
2. Remove the main module so that you can replace the
battery.
“Remove the Main Module” on page 91
3. Replace the battery. ■ “Remove the Battery” on page 123
■ “Install the Battery” on page 125
4. Install the main module after you have replaced the
battery.
“Install the Main Module” on page 95
5. Verify the replacement. “Verify the Battery” on page 126
Related Information
■
“Identifying Components”
■
“Detecting and Managing Faults”
■
“Preparing for Service”
■
“Component Service Task Reference” on page 23
■
“Returning the Server to Operation”
Remove the Battery
The battery is a cold-service component that can be replaced only after you have removed the
main module.
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause server components to fail.
To Next Page
Loading...
Need help?
General