Install a Power Supply
Servicing Power Supplies 137
6.
Install the replacement power supply.
See “Install a Power Supply” on page 137.
Related Information
■
“Determine Which Power Supply Is Faulty” on page 134
■
“Install a Power Supply” on page 137
Install a Power Supply
The power supply is a hot-service component that can be replaced by a customer.
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause failure of server components.
1.
Open the latch on the replacement power supply, and align the power supply
with the empty bay.
2.
Slide the power supply into the chassis.
To Next Page
Loading...
Need help?
General