Servicing the Main Module 89
Servicing the Main Module
The main module is a cold-service component that can be replaced only after you have
powered off the server. For the location of the main module, see “Front Panel Components
(Service)” on page 14.
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause server components to fail.
These topics explain how to service the main module.
Steps Description Links
1. Replace the main module. ■ “Remove the Main Module” on page 91
■ “Install the Main Module” on page 95
2. Remove the main module as part of another
component's service operation.
“Remove the Main Module” on page 91
3. Install the main module as part of another
component's service operation.
“Install the Main Module” on page 95
Related Information
■
“Identifying Components”
■
“Detecting and Managing Faults”
■
“Preparing for Service”
■
“Component Service Task Reference” on page 23
■
“Returning the Server to Operation”
To Next Page
Loading...
Need help?
General