Oracle SPARC T5-8 - Install the Rear Chassis Subassembly

Install the Rear Chassis Subassembly
Servicing the Rear Chassis Subassembly 185
9.
Using a Phillips screwdriver, loosen the five screws that secure the rear
chassis subassembly to the server chassis, and then, slide the rear chassis
subassembly out and away from the chassis.
10.
Slide the rear chassis subassembly out and away from the chassis.
Related Information
■
“Determine if the Rear Chassis Subassembly Is Faulty” on page 181
■
“Install the Rear Chassis Subassembly” on page 185
Install the Rear Chassis Subassembly
1.
If you have not already done so, remove the faulty rear chassis subassembly.
See “Remove the Rear Chassis Subassembly” on page 182.