Preparing for Service 49
Preparing for Service
These topics explain how to prepare to service the server.
Step Description Links
1. Review safety and handling information. “Safety Information” on page 49
2. Gather the tools for service. “Tools Needed for Service” on page 51
3. Locate the server to be serviced. “Locate the Server” on page 53
4. Find the server serial number. “Find the Server Serial Number” on page 52
5. Locate the component service information. “Component Service Categories” on page 52
6. For cold-service operations, shut down the OS, and
remove the power from the server.
“Removing Power From the
Server” on page 53
7. Prevent ESD damage before you handle any server
component.
“Prevent ESD Damage” on page 57
Related Information
■
“Identifying Components”
■
“Detecting and Managing Faults”
■
“Component Service Task Reference” on page 23
■
“Returning the Server to Operation”
Safety Information
For your protection, observe the following safety precautions when setting up your equipment:
■
Follow all cautions and instructions marked on the equipment and described in the
documentation shipped with your server.
■
Follow all cautions and instructions marked on the equipment and described in the SPARC
T5-8 Server Safety and Compliance Guide.
■
Ensure that the voltage and frequency of your power source match the voltage and
frequency inscribed on the equipment's electrical rating label.
■
Follow the ESD safety practices as described in this section.
To Next Page
Loading...
Need help?
General