Interpreting LEDs
Detecting and Managing Faults 29
■
“Matching Devices to Device Names” in SPARC and Netra SPARC T5 Series Servers
Administration Guide
■
Oracle ILOM Documentation Library
Oracle ILOM Service-Related Tools
You can use these Oracle ILOM shell commands when performing service-related tasks.
Oracle ILOM Command Description
help [command]
Displays a list of all available commands with syntax and
descriptions. Specifying a command name as an option
displays help for that command.
set /HOST send_break_action=break Takes the host server from the OS to either kmdb or
OpenBoot prompt (equivalent to a Stop-A), depending on
the mode in which the Oracle Solaris OS was booted.
start /HOST/console
Connects to the host.
show /HOST/console/history
Displays the contents of the host's console buffer.
set /HOST/bootmode property=value
Controls the method of booting for the host server's
firmware. The value of property can be state, config, or
script.
stop /System
or stop /SYS
Powers off the host server.
start /System
or start /SYS
Powers on the host server.
reset /System
or reset /SYS
Generates a hardware reset on the host server.
reset /SP
Reboots the SP.
Related Information
■
“Diagnostics Process” on page 25
■
“Tool Availability” on page 27
■
“Log In to Oracle ILOM (Service)” on page 28
■
Oracle ILOM Documentation Library
Interpreting LEDs
Use these steps to determine if an LED indicates that a component has failed in the server.
To Next Page
Loading...
Need help?
General