Oracle SPARC T5-8 - Determine Which DIMM Is Faulty (FMA)

Determine Which DIMM Is Faulty (FMA)
Servicing DIMMs 73
Related Information
■
“DIMM Configuration Fault Messages” on page 76
■
“Determine Which DIMM Is Faulty (FMA)” on page 73
■
“Determine Which DIMM Is Faulty (LEDs)” on page 75
■
“Install a DIMM” on page 78
■
“Server Upgrade Process” on page 59
Determine Which DIMM Is Faulty (FMA)
The FMA fmadm faulty command displays current server faults, including DIMM failures.
Type fmadm faulty at the faultmgmtsp prompt.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
faultmgmtsp> fmadm faulty
------------------- ------------------------------------ ---------------- ---------