Oracle SPARC T5-8 User Manual

Install the Front I/O Assembly
130 SPARC T5-8 Server Service Manual • November 2015
Install the Front I/O Assembly
Caution - This procedure requires that you handle components that are sensitive to static
discharge. Static discharges can cause the components to fail.
1.
Take the necessary ESD precautions.
See “Prevent ESD Damage” on page 57.
2.
Insert the front I/O assembly into position in the main module.
■
Gently slide the front I/O assembly into position with the ports inserted into the port holes in
the front of the main module.
■
Lower the rear of the front I/O assembly so that the captive screw is aligned with the screw
hole on the motherboard.

Oracle SPARC T5-8 Specifications

General

Brand	Oracle
Model	SPARC T5-8
Category	Server
Language	English