Oracle SPARC T5-8 User Manual

Install the Main Module
96 SPARC T5-8 Server Service Manual • November 2015
4.
Press the levers back together toward the center of the module, and then press
the levers firmly against the module to fully seat the module back into the server.
The levers should click into place when the module is fully seated in the server.
5.
Determine your next step:
a.
If you replaced an internal component, return to the procedure for that
component.
■
“Verify the Battery” on page 126
■
“Verify the Front I/O Assembly” on page 131
■
“Verify the Service Processor Card” on page 114.
■
“Verify the Storage Backplane” on page 107
■
“Verify the System Configuration PROM” on page 120
b.
If you replaced the entire main module, see “Verify the Main
Module” on page 97.

Oracle SPARC T5-8 Specifications

General

Brand	Oracle
Model	SPARC T5-8
Category	Server
Language	English