...
6. Confirm communications between the nodes and that SSH is working using the
same password for
oracle
,
root
, and
grid
.
From each node:
a. ssh to both nodes.
b. Ping both nodes.
7. Confirm there is at least 10 GB of space available on each node.
[root@oda]# df -h
[root@odb]# df -h
Adding the 10-Pack of SSDs
Add the 10-pack solid-state drives (SSDs) for data storage into the existing base
configuration to fully populate the base storage shelf.
Before adding the disks to the system, ensure that Oracle Database Appliance is on
the latest update version.
1. Insert disks one at a time in slots 10 through 19.
Note:
Allow at least one minute between inserting each disk to avoid flooding
of disk events into
oakd
.
After all 10 disks are added, go to Step 2.
2. Run the odaadmcli show ismaster command to determine which node is the
master.
# odaadmcli show ismaster
3. Run the odaadmcli expand storage command on the master node.
#odaadmcli expand storage
Precheck passed.
Successfully formatted 1.6TB SSD disks...
Check the progress of expansion of storage by executing 'odaadmcli show
disk'
Waiting for expansion to finish ...
Wait 30 seconds before proceeding to the next step.
Chapter 10
Adding the 10-Pack of SSDs
10-5
To Next Page
Loading...
Need help?
General