The GI and RDBMS Clone files for release 18.3 are extracted.
odacli-dcs-18.3.0.0.0-181205-GI-18.3.0.0.zip
odacli-dcs-18.3.0.0.0-180905-DB-18.0.0.0.zip
3. Copy the software files from the external client to Oracle Database Appliance. Use
the
scp
or
sftp
protocol to copy the bundle.
Example using
scp
command:
scp software_file root@oda_host:/tmp
Example using
sftp
command:
sftp root@oda_host
Enter the
root
password, and then copy the file.
put software_file
For example, for release 18.3:
put odacli-dcs-18.3.0.0.0-181205-GI-18.3.0.0.zip
put odacli-dcs-18.3.0.0.0-180905-DB-18.0.0.0.zip
The GI and RDBMS Clone files are copied to the temporary location on the appliance.
You can update the repository, and create the appliance, as explained in the next
topic.
Installing Oracle Database Appliance Software
Install Oracle Database Appliance software, before creating the appliance.
1. Verify the current system version by running the following command on both
nodes:
# /opt/oracle/dcs/bin/odacli describe-component -v
2. Update the repository with Oracle Grid Infrastructure and Database software.
[root@oda1 opt]# /opt/oracle/dcs/bin/odacli update-repository
-f /tmp/GI_clone_file,/tmp/DB_clone_file
For example, for release 18.3
# /opt/oracle/dcs/bin/odacli update-repository -f
/tmp/odacli-dcs-18.3.0.0.0-181205-GI-18.3.0.0.zip,
/tmp/odacli-dcs-18.3.0.0.0-180905-DB-18.0.0.0.zip
Chapter 4
Installing Oracle Database Appliance Software
4-7
To Next Page
Loading...
Need help?
General