oakcli show asr
Use the
oakcli show asr
command to display your Oracle Auto Service Request
configuration details.
Syntax
oakcli show asr [-h]
Parameters
(Optional)
-h
displays the help for using this command.
oakcli show cooling
Use the
oakcli show cooling
command to display the status of the cooling units.
Syntax
oakcli show cooling [-h]
Parameters
(Optional)
-h
displays the help for using this command.
Example
Display the cooling unit information for the node where the command is executed:
oakcli show cooling
NAME HEALTH HEALTH_DETAILS LOCATION FAN % FAN SPEED
Fan_0 OK - FM0 30 % 6300 RPM
Fan_1 OK - FM0 19 % 3800 RPM
Fan_10 OK - FM2 34 % 6600 RPM
Fan_11 OK - FM2 23 % 4100 RPM
Fan_12 OK - FM3 32 % 6300 RPM
Fan_13 OK - FM3 22 % 3900 RPM
Fan_14 OK - FM3 24 % 4700 RPM
Fan_15 OK - FM3 14 % 2500 RPM
Fan_2 OK - FM0 29 % 6400 RPM
Fan_3 OK - FM0 18 % 3700 RPM
Fan_4 OK - FM1 32 % 6400 RPM
Fan_5 OK - FM1 20 % 3700 RPM
Fan_6 OK - FM1 33 % 6400 RPM
Fan_7 OK - FM1 22 % 3800 RPM
Fan_8 OK - FM2 33 % 6400 RPM
Fan_9 OK - FM2 22 % 3900 RPM
Chapter 14
oakcli show commands
14-37
To Next Page
Loading...
Need help?
General