Oracle X6-2-HA - Odaadmcli Show Raidsyncstatus

Example 13-115 Showing Controller Details
# odaadmcli show controller 1
Controller [1] information:
sun-controller-id = nvme:1b:00.00
sun-id = nvme:1b:00.00
sun-controller-manufacturer = Samsung
pci-vendor-id = 0x0000144d
sun-controller-model = 0xa821
pci-device-id = 0x0000a821
sun-controller-type = NVMe
sun-card-manufacturer = Sun Microsystems
pci-subvendor-id = 0x0000108e
sun-card-model = 0xa803
pci-subdevice-id = 0x0000a803
pci-address = 1b:00.0
sun-version-firmware = KPYA7R3Q
sun-serial-number = S2LHNAAH101008
sun-product-name = MS1PC2DD3ORA3.2T
pci-slot-number = 11
nvme-power-control = 1
sun-nac-name = /SYS/DBP/NVME1
odaadmcli show raidsyncstatus
Use the odaadmcli show raidsyncstatus command to display the RAID SYNC
status.
File Path
$ORACLE_HOME/opt/oracle/dcs/bin/odaadmcli
Syntax
To display the status of RAID SYNC:
odaadmcli show raidsyncstatus [-h]
Parameters
Parameter Description
--help , -h
(Optional) Displays help for using the command.
Example 13-116 Displaying the RAID SYNC Status
To display the RAID SYNC details and status:
# odaadmcli show raidsyncstatus
Raid Type Raid Device Raid Status maintainPdFailHistory Rebuildrate
H/W Raid /dev/sda Optimal ON 30%
Chapter 13
odaadmcli Storage Commands
13-122