oakcli show validation storage
Use the
oakcli show validation storage
command to show whether validation
storage is enabled or disabled.
Syntax
oakcli show validation storage [-h]
Parameter
(Optional)
-h
displays help for using the command.
Example 14-32 Determining if Storage Validation is Enabled
# oakcli show validation storage
Enabled
oakcli show validation storage errors
Use the
oakcli show validation storage errors
command to show hard storage
errors.
Hard errors include having the wrong type of disk inserted into a particular slot, an
invalid disk model, or an incorrect disk size.
Syntax
oakcli show validation storage errors [-h]
Parameter
(Optional)
-h
displays help for using the command.
oakcli show validation storage failures
Use the
oakcli show validation storage failures
command to show soft
validation errors. A typical soft disk error would be an invalid version of the disk
firmware.
Syntax
oakcli show validation storage failures [-h]
Parameter
(Optional)
-h
displays help for using the command.
Chapter 14
oakcli show commands
14-49
To Next Page
Loading...
