Table 2-1 (Cont.) Checklist for System Configuration Information for Oracle
Database Appliance
System Information Description
Network Information Obtain network information:
• Public network
• (Optional) Additional network
• (Optional) Oracle Integrated Lights Out Manager (Oracle ILOM)
network
Initial Database
Details (if you want to
create one during
deployment)
• Database name
• Normal or container database
• Class (database template)
• Database characterset
• Database language
• Database version
• Shape (for example: odb1 or odb2)
• Storage (Oracle ASM or Oracle ACFS)
• Configure Oracle Enterprise Manager console
Checklist for Custom Node Network Address Configuration
Use the checklists in this topic to identify the IP addresses required for Oracle
Database Appliance.
By default, names for network interfaces are derived from the Oracle Database
Appliance system name, which you provide during installation. Also, when you use
Oracle Appliance Manager Configurator, the addresses for the public IP addresses
can be automatically assigned in a sequence starting with the address you provide for
the public IP address for Node 0. The other IP addresses generated are, in order, the
public address for Node 1; the virtual IP address for Node 0; the virtual IP address for
Node 1; and the SCAN addresses.
You can retain the default values, or you can use addresses provided by your system
administrator to perform a custom configuration. Ensure that all addresses listed as
"Yes” in the "Same Subnet" column are on the same subnet as each other.
Minimum IP Address Requirements for Oracle Database Appliance Bare Metal
Deployment
Table 2-2 Minimum IP Address Requirements for Oracle Database Appliance
Bare Metal Deployment
Type of IP Minimum IP
Address
Counts
IP Address
Default
Values
Your Values As Applicable Same
Subnet
Host Public
Addresses
2 No default No default Yes
Chapter 2
Gathering System Requirement Information
2-10
To Next Page
Loading...
Need help?
General