Example 13-110 Displaying Server Details
# odaadmcli show server
Power State : On
Open Problems : 0
Model : ORACLE SERVER X7-2
Type : Rack Mount
Part Number : 7320190
Serial Number : 1605NM10JJ
Primary OS : Not Available
ILOM Address : 10.209.8.215
ILOM MAC Address : 00:10:E0:95:98:F0
Description : Oracle Database Appliance X7-2 Small 1606NM1s02
Locator Light : Off
Actual Power Consumption : 135 watts
Ambient Temperature : 24.250 degree C
Open Problems Report : System is healthy
odaadmcli Storage Commands
Use the
odaadmcli storage
commands to perform storage diagnostics.
• odaadmcli expand storage
Use the odaadmcli expand storage command to expand storage.
• odaadmcli show disk
Use the odaadmcli show disk command to display the status of a single disk
or of all disks on the system.
• odaadmcli show diskgroup
Use the odaadmcli show diskgroup command to list configured diskgroups
or display a specific diskgroup configuration.
• odaadmcli show controller
Use the odaadmcli show controller command to display details of the
controller.
• odaadmcli show raidsyncstatus
Use the odaadmcli show raidsyncstatus command to display the RAID
SYNC status.
• odaadmcli show storage
Use the odaadmcli show storage command to show the storage controllers,
expanders, and disks.
• odaadmcli stordiag
Use the odaadmcli stordiag command to collect detailed information for each
disk or NVMe.
• odaadmcli power disk
Use the odaadmcli power disk command to power a disk on or off.
Chapter 13
odaadmcli Storage Commands
13-117