• oakcli show expander
Use the
oakcli show expander
command to display information about a SAS
expander.
• oakcli show ismaster
Use the
oakcli show ismaster
command to determine which node is the master
node.
• oakcli show fs
Use the
oakcli show fs
command to display all database and cloudfs file
systems created on ASM Cluster File System (ACFS) in addition to the local file
systems on the Oracle Database Appliance node.
• oakcli show memory
Use the
oakcli show memory
command to display information about memory
modules.
• oakcli show network
Use the
oakcli show network
command to display information about the network
subsystem.
• oakcli show power
Use the
oakcli show power
command to display information about the power
supply subsystem.
• oakcli show processor
Use the
oakcli show processor
command to display information about CPU
processors.
• oakcli show raidsyncstatus
Use the
oakcli show raidsyncstatus
command to display the status of the
RAID rebuild after a failed local disk is replaced.
• oakcli show repo
Use the
oakcli show repo
command to display information about virtual machine
repositories.
• oakcli show server
Use the
oakcli show server
command to display information about the server
subsystem.
• oakcli show storage
Use the
oakcli show storage
command to display information about the storage
for controllers, expanders, and disks.
• oakcli show validation storage
Use the
oakcli show validation storage
command to show whether validation
storage is enabled or disabled.
• oakcli show validation storage errors
Use the
oakcli show validation storage errors
command to show hard
storage errors.
• oakcli show validation storage failures
Use the
oakcli show validation storage failures
command to show soft
validation errors. A typical soft disk error would be an invalid version of the disk
firmware.
• oakcli show version
Use the
oakcli show version
command to display the applied patch versions for
Oracle Database Appliance software and firmware.
Chapter 14
oakcli show commands
14-36