Oracle X6-2-HA - Page 364

Parameter Description
--incidenttime time
Collect Cluster Health Monitor data from the specified time.
Enter the time using the format: YYYYMMDDHHMMSS24 .
If you do not use the --incidenttime parameter, then the
command collects data for the past 24 hours.
--incidentduration
time
Collect Cluster Health Monitor data for the duration after the
specified time. Enter the time using the format: HH:MM. If you do
not specify a duration, then the command collects all Cluster
Health Monitor data after the specified incident time.
--excl [ comp1 , comp2 ...]
Exclude the specified component logs. Valid components are:
acfs , invt , sys , ocr , crs , home , and base .
--clean
Remove the diagnosability information gathered by this
command.
--storage
Collect all of the logs for any storage issues. The logs can be
used when you are experiencing any problems with storage and
need support to diagnose the logs.
--h
(Optional) Display help for using the command.
oakcli describe-system
Use the oakcli describe-system command to display details about components
installed on the system.
File Path
$ORACLE_HOME/opt/oracle/oak/bin/oakcli
Syntax
oakcli describe-system
Usage Notes
The command describes the system components such as node information, installed
RPMs, Oracle Grid Infrastructure version and patches, Database home details and
stores the information in a file.
Example 14-14 Example Command to View the Bill of Materials from the
Command Line for Virtualized Platforms Deployments
oakcli describe-system
oakcli describe-system
Output : ./oakcli describe-system
Generating a list of BOM component...
Output file is : /opt/oracle/oak/Inventory/
oda_bom_20180821022110.log
Chapter 14
oakcli describe-system
14-29