oakcli validate
Validates the state of an Oracle Database Appliance or the viability of an operating
system patch.
Syntax
oakcli validate [[-V | -l | -h]] | [[-v][-f output_file] [-a | -d | -c checklist][-
ver patch_version]]
Parameters
Parameter Description
-V
Display the version of
oakValidation
.
-l
List the items that can be checked (and their descriptions).
-h
(Optional) Display help for using the command.
-v
Show verbose output (must be used with a parameter that
generates a validation report).
-f output_file
Send output to a file with a fully qualified file name,
output_file
, instead of to the screen (
stdout
).
-a
Run all system checks, including
DiskCalibration
. Oracle
recommends that you use this command to validate system
readiness before deployment. Do not run
oakcli validate
with this option on a busy production system, because the
DiskCalibration
system check can cause performance
issues.
-
d
Run only the default checks. The default checks are
NetworkComponents
,
OSDiskStorage
,
SharedStorage
, and
SystemComponents
.
The
NetworkComponents
validation check is not available on
Oracle Database Appliance V1.
-c checklist
Run the validation checks for the items identified in
checklist
,
a comma-delimited list. Use this parameter to check either a
single item or subset of items.
-c
ospatch Run the validation checks for the patch version identified in
-ver
patch_version
.
-ver
patch_version
Report any reasons for not being able to patch Oracle Database
Appliance with the patch named in
patch_version
.
Listing All Checks and Their Descriptions
oakcli validate -l
Checkname -- Description
========= ===========
*SystemComponents -- Validate system components based on ilom sensor data
readings
*OSDiskStorage -- Validate OS disks and filesystem information
*SharedStorage -- Validate Shared storage and multipathing information
DiskCalibration -- Check disk performance with orion
*NetworkComponents -- Validate public and private network components
Chapter 14
oakcli validate
14-60
To Next Page
Loading...
