690
DP-C405/C305/C265
FEB 2008Ver. 1.1
(5) Remove the Dummy Plug.
Note:
The Dummy Plug is used for Safety Purposes
when removing the Optional LVPS, store it in a
safe place for future use.
(6) Release 2 Harnesses from the Harness Clamp.
(7) Connect the pre-installed Harness to the
Optional LVPS Harness.
(8) Connect the pre-installed Harnesses to
connector CN65, and CN66 on the Optional
LVPS.
(9) Install the Optional LVPS.
(10) Secure the Optional LVPS with 2 Screws
(M3 x 6).
To Next Page
Loading...
