731
DP-C405/C305/C265
FEB 2008Ver. 1.1
9.16.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
(1) Loosen 11 Screws.
(2) Remove the Rear Cover.
Caution:
If the LED on the SC PC Board is lit (ON), the
Power to the machine is still ON.
Please read the entire section “9.16.2. Installation”
once again.
(3) Bend the Protective Tab on the Rear Cover
approx. 180
° towards the inside of the machine
as illustrated.
(4) Remove 11 Screws.
(5) Remove the Rear Cover Assembly.
To Next Page
Loading...
