Panasonic DP-C305 - Page 732

732
DP-C405/C305/C265
FEB 2008Ver. 1.1
<For DP-C405 / C354 Series>
Follow the steps below
<For DP-C322 Series> Skip to step (30)
(6) Install 2 PCB Spacers.
(7) Install the Coin Vendor PC Board as illustrated.
(8) Secure the PC Board with 2 Screws.
(9) Disconnect the Original Harness from CN504
on the EC PCB.
Note: Relay Harness (A)
<For DP-C405 Series>
White & Red Combination Harness with 32 Pin
Connectors (Small).
<For DP-C354 / C322 Series>
All White Harness with 36 Pin Connectors
(Large).
(10) Connect the Relay Harness (A) to CN504.
(11) Connect the Original Harness, and the Relay
Harness (A).