Chapter 8
8-bit Timer
Control Registers VIII - 11
8.2.2 Prescaler Control Registers
When the prescaler output is selected as the count clock source for 8-bit timer, these registers should be con-
trolled.
■ Prescaler Control Register 1 (TM03PSC : 0x0000A198) [8,16-bit Access Register]
■ Prescaler Control Register 2 (TM47PSC: 0x0000A1B8) [8,16-bit Access Register]
■ Prescaler Control Register 3 (TM1417PSC: 0x0000A1D8) [8,16-bit Access Register]
bp 76543210
Flag TMPSC
NE1
-------
At reset 00000000
Access R/WRRRRRRR
bp Flag Description Set condition
7 TMPSCNE1
Prescaler 1 operation enable 0: Operation disabled
1: Operation enabled
6-0 - - -
bp 76543210
Flag TMPSC
NE2
-------
At reset 00000000
Access R/WRRRRRRR
bp Flag Description Set condition
7 TMPSCNE2
Prescaler 2 operation enable 0: Operation disabled
1: Operation enabled
6-0 - - -
bp 76543210
Flag TMPSC
NE3
-------
At reset 00000000
Access R/WRRRRRRR
bp Flag Description Set condition
7 TMPSCNE3
Prescaler 3 operation enable 0: Operation disabled
1: Operation enabled
6-0 - - -
To Next Page
Loading...
