Chapter 6
ROM Correction
ROM Correction Operation VI - 15
6.3.3 Cautions for Programming
ROM correction can be programmed such that 8 bytes of data starting with an address that is a multiple
of 8 are changed through 1 channel. For instance, when 8-byte data change from x’40006543 is
selected, 8-byte data change from x’40006540 to x’40006547 and from x’40006548 to x’4000654F can-
not be selected. When more than 8 bytes of data must be continuously changed, be sure to program
ROM correction such that 8-byte data change through each of the channels starts with an address that
is a multiple of 8.
To Next Page
Loading...
