Chapter 13
Serial Interface 2
XIII - 4 Control Registers
13.2 Control Registers
13.2.1 Registers
Table: 13.2.1 shows registers that control serial interface 2.
Table:13.2.1 Serial Interface 2 Control Registers
..
When changing the setting value of the mode register, rewrite it after setting the serial forced
reset.
(Both the SC2BIS flag and the SC2BOS flag of the SC2CTR1 registers are set to "0".)
..
Register Address R/W Access size Function Page
Serial 2
SC2RB 0x0000A12C R 8,16 Serial interface 2 reception data buffer XIII-5
SC2TB 0x0000A130 R/W 8,16 Serial interface 2 transmission data buffer XIII-5
SC2CTR0 0x0000A120 R/W 8 Serial interface 2 mode register 0 XIII-6
SC2CTR1 0x0000A121 R/W 8 Serial interface 2 mode register 1 XIII-7
SC2CTR2 0x0000A124 R/W 8 Serial interface 2 mode register 2 XIII-8
SC2CTR3 0x0000A125 R/W 8 Serial interface 2 mode register 3 XIII-9
SC2STR 0x0000A128 R 8,16 Serial interface 2 status register XIII-10
G15ICR 0x0000893C R/W 8,16 Group 15 interrupt control register V-24
P1MD 0x0000A031 R/W 8 Port 1 output model register VII-11
P1DIR 0x0000A021 R/W 8 Port 1 I/O control register VII-11
P2MD 0x0000A032 R/W 8 Port 2 output mode register VII-14
P2DIR 0x0000A022 R/W 8 Port 2 I/O control register VII-13
Serial 0 to 2 SIFCLK 0x0000A10E R/W 8,16 Serial clock selection register XII-10
R/W Readable / Writable
R Readable only
W Writable only
To Next Page
Loading...
