Panasonic MN103S

Chapter 1
Overview
I - 6 Hardware Functions
- Count clock source
IOCLK, IOCLK/8, Timer 0 underflow, Timer 1 underflow,
TM10BIO pin input
Timer 11 (16-bit timer for general use)
- Interval timer, Event count, up/down count,
timer output, PWM output (output to 6 ports all at once is possible),
input capture, one-shot output, external trigger start
- Count clock source
IOCLK, IOCLK/8, Timer 4 underflow, Timer 5 underflow,
TM11IO1 pin input
Timer 12 (16-bit timer for general use)
- Interval timer, up/down count, trigger start 3-phase PWM,
AD conversion start
- Count clock source
MCLK, MCLK/8, IOCLK, IOCLK/8, Timer 6 underflow,
Timer 7 underflow
Timer 13 (16-bit timer for general use)
- Interval timer, up/down count, trigger start 3-phase PWM,
AD conversion start
- Count clock source
MCLK, MCLK/8, IOCLK, IOCLK/8, Timer 6 underflow,
Timer 7 underflow
Timer 14 (8-bit timer for general use)
- Interval timer, Baud rate timer
- Count clock source
IOCLK, IOCLK/8, IOCLK/32, IOCLK/128, Timer 15 underflow,
Timer 16 underflow
Timer 15 (8-bit timer for general use)
- Interval timer, Baud rate timer,
Cascade connection function (connected to Timer 14)
- Count clock source
IOCLK, IOCLK/8, IOCLK/32, Timer 14 underflow,
Timer 16 underflow
Timer 16 (8-bit timer for general use)
- Interval timer, Baud rate timer,
Cascade connection function (connected to Timer 15)
- Count clock source
IOCLK, IOCLK/8, IOCLK/32, IOCLK/128, Timer 14 underflow,
Timer 15 underflow
Timer 17 (8-bit timer for general use)
- Interval timer, Timer pulse output, Event count,
Cascade connection function (connected to Timer 16)
- Count clock source
IOCLK, IOCLK/8, IOCLK/32, Timer 14 underflow,
Timer 15 underflow, Timer 16 underflow, TM17IO pin input
Watchdog Timer Detection time 6.55 ms to 1677.72 ms
(oscillation frequency 10 MHz )
Generates non-maskable interrupts at detection