Panasonic MN103S

Chapter 1
Overview
I - 8 Hardware Functions
- Transfer clock source
1/2, 1/4, 1/16, and 1/64 of timer 14 underflow,
1/2, 1/4, 1/16, and 1/64 of timer 15 underflow,
1/2, 1/4, 1/16, and 1/64 of timer 16 underflow,
IOCLK/2, IOCLK/4, SBT2 pin
- Can be selected as the first bit to be transferred,
Any transfer size from 1 to 8 bits can be selected.
- Continuous transmission, reception, and transmission/reception
- Maximum transfer rate: 5.0 Mbps
Full duplex UART
- Parity error, overrun error and flaming error detection
- Transfer clock source
1/32, 1/64, 1/256, and 1/1024 of timer 14 underflow,
1/32, 1/64, 1/256, and 1/1024 of timer 15 underflow,
1/32, 1/64, 1/256, and 1/1024 of timer 16 underflow,
IOCLK/32, IOCLK/64
- Can be selected as the first bit to be transferred,
Any transfer size from 7 to 8 bits can be selected.
- Continuous transmission, reception, and transmission/reception
- Maximum transfer rate: 300 Kbps
Regulator incorporates regulator, and use of 5 V power supply is possible
Power Supply Detection
Detection level 3.6 V to 4.5 V
When power supply voltage is under detection level, reset is generated.
Port / pins I/O ports 61 pins
Motor control output 12 pins
External interrupt 9 pins
A/D input 16 pins
Special pins 17 pins
Reset input pin 1 pin
Oscillation pin 2 pins
Test pin 3 pins
Power pin 11 pins
Package LQFP80 (14 mm square, 0.65 mm pitch)
Code name LQFP080-P-1414A