Panasonic MN103S

Chapter 9
16-bit Timer
Event Count IX - 47
(11) Enable the interrupt
G7ICR(0x0000891C)
bp8: G7IE1=1
(11) Set the G7IEO flag of the G7ICR register to “1” to
enable the interrupt.
(12) Start the timer operation
TM8MD(0x0000A200)
bp7: TMCNE=1
(12) Set the TMCNE flag of the TM8MD register to “1” to
operate the timer 8.
Setup Procedure Description