Adjusting the Belt Speed and Stack Pressure on the On
Edge Stacker
Adjust the speed of the belt and pack pressure to ensure the material stacks properly on the On Edge
Stacker (OES). Properly stacked mail is perpendicular to the belt. Improper vertical stacking can cause
jams at the stacker exit.
Proper Vertical Stacking - mailpieces are straight and even
Improper Vertical Stacking - mailpieces are uneven and not tightly packed
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 96 of 328
To Next Page
Loading...