Epic Material Specifications
Maximum collation thickness = 0.5" (12.7 mm) uncompressed at the insertion.
Minimum Maximum
Depth 3.5-inch (89 mm) 8.5-inch (216 mm)
Width 5.5-inch (140 mm) 12-inch (305 mm)
Paper Width 16 lb bond (60gm/sq m) 28 lb bond (100 gm/sq.m)
Paper Weight 6 lbs/linear inches n/a
Document Dimensions (no input)
Minimum Maximum
Depth 3.5-inch (89 mm) 9.5-inch (241 mm)
Width 7-inch (177mm) 12-inch (305mm)
Paper Weight 18 lb bond (70gm/sq. m) 28 lb bond (100 gm/sq.m)
Perforation Strength 6 lbs linear inches n/a
Document Dimensions (when supplied from the input)
General Paper Requirements
These material guidelines are recommended to achieve performance goals and apply to all documents
processed on the system.
l Store material in a controlled environment away from moisture
l Paper moisture content should be within 4% - 6% by weight
l Material should be stored within a temperature range of 65 - 85° (+/- 2% humidity
l Material should be stored within a range of 40% - 60% relative humidity
Specifications
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 274 of 328
To Next Page
Loading...