Changing Out the Booklet Feeder Separator Assemblies
Note:
This procedure is for standard booklet feeders or booklet feeders with a bulk loader hopper.
Each booklet feeder has a separator assembly that separates the insert material during the feed process.
The separator can be adjusted to accommodate various insert thickness. There are two separator
options for the booklet feeder, a stone or a stripper bar.
You can switch between the two separator options depending on the type of insert material you are
running. If the stone separator is not working, try using the stripper bar. Both styles are removed or
replaced the same way.
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 138 of 328
To Next Page
Loading...